Setting Parameters
page 79
NF 650 - rev. 01 / 29.06.2020
31.2.6 Connections Menu
Fig. 31-7
Connections menu
This menu is only available for transmitter types T4, TM and TZ, as it deals with
• the transmitter configuration comprising multiple measurement points
and/or
• the connection of extension modules NFE.
The two DSP cards (digital signal processor cards) and the analog and digital inputs and
outputs of the respective measurement points are assigned here. Operational parameters can
then only be assigned and included in the calculations for the measurement points selected
here. Furthermore the extension modules (NFE) arrangements are selected here.
32 Application / MP1 / MP2 / Combi Parameter Menu
32.1 Setting parameters in Measurement place Menu
The >Measure place< submenu is one of the most important basic menus when it comes to
setting parameters.
The following basic settings are required to set the parameters of the measurement place:
• Activating the measurement point (for types with several measurement points)
• Name of measurement place
• Arrangement and number of paths
• Measurement medium and medium temperature
• Type and dimensions of channel profile
• Channel profile Offset
• Possible solid sediments settings (sludge level)
• 3D preview
• Velocity evaluation
• v-determination low levels
• Low-flow suppression
• Measurement damping and stability
Содержание NivuFlow 650
Страница 39: ...Installation and Connection page 39 NF 650 rev 01 29 06 2020 Fig 21 4 Terminal connections NivuFlow 650 Type T4...
Страница 41: ...Installation and Connection page 41 NF 650 rev 01 29 06 2020 Fig 21 6 Terminal connections NivuFlow 650 Type TZ...
Страница 173: ...Approvals and Certificates Page 173 NF 650 rev 01 29 06 2020 Approvals and Certificates...
