Nivus NivuFlow 650, Инструкция по эксплуатации, Страница: 99 / 173

Setting Parameters
page 99 NF 650 - rev. 01 / 29.06.2020
Fig. 32-16 Analog inputs: Activation / Ext. Reading / Flow
Currently the analog inputs can be used for external readings (such as temperature in °C)
and for flow measurement. The transmitter hence can be utilised as an extra data logger for
readings from other systems. This, however, does not affect the transmitter’s functionality as a
flow meter.
The values below must be chosen/entered in >External Reading< .
ƒ
Selection/Input Options:
Input Range: >0-20 mA< or >4-20 mA<
Label: manual input
Unit: manual input
Linearisation: >2-Point< or >Table<
For >2-Point< linearisation: manual input of values for 4 or 20 mA
For >Table< linearisation: manual input of the number of >Entries<, then select
>Table<, complete and confirm.
The values below must be chosen/entered in >Flow< .
ƒ
Selection/Input Options:
Input Range: >0-20 mA< or >4-20 mA<
Label: manual input
Linearisation: >2-Point< or >Table<
For >2-Point< linearisation: manual input of values for 4 or 20 mA
For >Table< linearisation: manual input of the number of >Entries<, then select
>Table<, complete and confirm.
32.5.2 Analog Outputs
The number of analog outputs depends on the type (see Sect. “17.1 Device Types”).
The available analog outputs are shown in the top right corner of the display.
The analog outputs can be selected successively by pressing the right-hand control key
>Tab<. The selection is shown as clear text message in the top left corner of the display.
Default setting: Output inactive
The following different functions can be assigned to the analog output.