Certificate No.:
Date of Issue:
Manufacturer:
Additional Manufacturing location
(s):
IECEx Certificate
of Conformity
IECEx TUN 14.0014
2015-09-25
NIVUSGmbH
Im Tale 2
75031 Eppingen
Germany
Issue No.: 1
Page 2 of 4
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and
found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products
covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This
certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents
as amended.
STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified
documents, was found to comply with the following standards:
IEC 60079-0
:
2011
Edition: 6.0
IEC 60079-11
:
2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
This Certificate
does not
indicate compliance with electrical safety and performance requirements other than those
expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
DE/TUN
/
E
x
TR
1
4
.
00
2
7/
01
Quality Assessment Report:
DE/TUN
/
QAR
1
3
.
00
1
1
/
02
