Technical Instruction
Ex-Separator Module iXT0
Safety instructions
page 14
Ex-Separator Module iXT0 - rev. 02 / 28.08.2017
6 Liability disclaimer
The manufacturer reserves the right to change the contents of this document in-
cluding this liability disclaimer without prior notice and cannot be held responsible
in any way for possible consequences resulting from such changes.
For connection, initial start-up and operation as well as maintenance of the unit the
following information and higher legal regulations of the respective country (in
Germany e. g. VDE regulations) such as applicable Ex regulations as well as safe-
ty requirements and regulations in order to avoid accidents shall be observed.
The safety-related values of the connected iXT0 shall comply with the technical
specifications or the specifications contained in the according EC type examina-
tion certificate.
Interconnecting several active devices within an intrinsically safe circuit may result
in different safe maximum values. In such cases the intrinsic safety may be im-
paired!
All operations on the device which go beyond installation or connection measures
in principle shall be carried out by NIVUS staff or personnel authorised by NIVUS
due to reasons of safety and guarantee.
Operate the iXT0 only in technically perfect working order.
Improper Use
Not being operated in accordance with the requirements may impair the safety.
The manufacturer is not responsible for failures resulting from improper use.
