14
EN
SPC type
WARNING
Before using the electric screwdriver, lock the connector securely for a connection between the electric
screwdriver and the screw fastening counter.
Since there is a danger of malfunction or electric shock, connect the electric screwdriver to the power supply
with the screw fastening counter turned OFF.
For the power supply for the screw fastening counter, use the same voltage as the rated voltage of the electric
screwdriver being used.
The voltage supplied from the electric screwdriver to the screw fastening counter will be the same value as the
power supply voltage of the screw fastening counter.
1
Confirm that the power supply of the screw fastening counter is OFF and connect the connection
cord to the screw fastening counter
2
Turn ON the power of the screw fastening counter
Changeover switch
CAUTION
Do not operate the changeover switch while the tool is rotating. Doing so could cause a failure.
When the tool is not used, set the switch to neutral position.
Do not apply a shock (such as dropping) or excessive load to the changeover switch. Doing so could cause a
failure.
By sliding the changeover switch, you can change
the rotation direction of the electric screwdriver.
“ - ” means neutral. The electric screwdriver does
not rotate.
Rotates
counterclockwise
Rotates clockwise
Basic Operation
