16
EN
Screw tightening
WARNING
Firmly hold the main body to avoid losing your grip.
CAUTION
Properly apply the bit end to the screw head.
Check that the bit is not worn.
1
Slide the changeover switch to the “R” side
2
Apply the bit end to the screw head and press the start switch
3
When the electric driver stops, release the start switch
Adjusting the output torque
WARNING
Before adjusting the output torque, always turn OFF the power.
CAUTION
The torque scale is a standard. The output torque range is not guaranteed.
1
Turn the torque adjustment ring cover counterclockwise to remove it
2
To increase the output torque, turn the torque adjustment ring clockwise
To decrease the output torque, turn the torque adjustment ring counterclockwise
White paint
Basic Operation
