6
EN
5 Preparation
Attaching a bit
WARNING
When attaching or removing the bit, always disconnect the power plug from the outlet.
1
Insert a bit while pulling the sleeve
Sleeve
Pull the sleeve
Bit
2
Release the sleeve and make sure the bit does
not come off
To remove the bit, pull out the bit while pulling the
sleeve.
Attaching the suspension bail
CAUTION
If the suspension bail is pulled forcefully, it may not return to original status. Use an appropriate strength
necessary for attachment or removal.
1
Lightly pull both sides of the suspension bail and fit it into
the hole
Hole
TV07844-0̲DLV30A-AD̲en-UL.indb 6
2017/06/22 10:25:59
