Nitto Kohki delvo DLV30A06L-AD, Инструкция по эксплуатации

Страница: 10 / 18

8
EN
Attaching the Pistol Grip
WARNING
 
When attaching or removing the Pistol Grip, always disconnect the power plug from the outlet.
 
After fixing the Pistol Grip with the screw, check for looseness, slip, and displacement of the screw.
CAUTION
 
Use care not to lose parts.
1
Match the rib of the Pistol Grip body A and the groove of the frame handle
Match the semicircle cut-out of the Pistol Grip body A and the semicircle rib of the frame handle.
2
Attach the parts to the positions shown in the following figure
3
Match the rib of the Pistol Grip body B and the groove of the frame handle
Match the semicircle cut-out of the Pistol Grip body B and the semicircle rib of the frame handle.
4
Tighten the screws
Lever start type Push start type
1
Body A ...... 1 piece
2
Body B ..... 1 piece
3
Trigger ...... 1 piece
4
Pin ............ 1 piece (2 pieces for push start type)
5
Spring ....... 1 piece (lever start type only)
6
Screw ....... 5 pieces
1
Rib
2
Groove
3
Semicircle cut-out
4
Semicircle rib
Preparation
TV07844-0̲DLV30A-AD̲en-UL.indb 8 2017/06/22 10:25:59