background image

1

EN

Product Specific Safety Rules

 WARNING

This product is for domestic use.

This unit complies with the domestic safety standards only. The product cannot be used overseas.

When using an extension cord, select the wire diameter according to the extended length.

If the power cord is too long or a thin cable is wound on a coil drum for a long length, voltage drop could be 

caused. In such a case, the original product performance cannot be demonstrated.  

Maximum extended cable length

Wire diameter 

(conductor nominal cross-sectional area)

10 m

1.25 mm

2

 or more

20 m

2 mm

2

 or more

30 m

3.5 mm

2

 or more

Do not use the product together with another electric tool.

 CAUTION

This tool is not an impact type electric screwdriver. Do not tighten twice (extra tightening). Also, it cannot be 

used for screw tightening of such things as wood or drywall.

Depending on fastening conditions, screws may become loose.

Improper impacts could decrease product life or cause product failure.

Do not use the tool for anything other than screw tightening.

It should not be used for tasks such as drilling or threading (such as a tapper).

About Unit Notation

This instruction manual is written using both SI units and the imperial measurement method (yards, pounds).

Numeric values outside the (  ) are the value in SI units, while those inside the (  ) are the imperial measurement 

value.

Notation 

Example: 

Length 

25.4 

(1")      Weight: 

0.45 

(1)      Torque: 

1.13 

(10)

in

mm

lbs

kg

Lb·in

Nm

TV07844-0̲DLV30A-AD̲en-UL.indb   1

2017/06/22   10:25:59

Содержание delvo DLV30A06L-AD



















Отзывы: