background image

 

 

 

 

Before using this control panel, please carefully read this Operating Instruction Manual and use 

the panel correctly. Also keep this manual safely. 

 

In order to indicate a degree of impending danger or damage, conditions expected to occur, if improperly operated, 

are indicated by          WARNING and by     CAUTION. 
 

WARNING 

This indicates a possibility that yourself or other people may be killed or be seriously injured 

by improper operation. 

 

CAUTION 

This indicates a possibility that yourself or other people may be injured and equipment and 

property may be damaged by improper operation.   

 

Caution on Safety

 

 

WARNING

 

  Qualification of Fire Protection Engineer is required to install this control panel.     

   Please ask us or engineering works company, without fail, to install. Please conduct installation of this control 

panel in accordance with Installation Manual.   

  Do not open control panel except by authorized personnel (Fire Protection Engineer etc), otherwise equipment 

function may be lost and injury may be caused by electrification. 

  When this control panel is at monitoring mode, please set all switches at normal positions. 

  Please do not modify the control panel or replace its parts, otherwise equipment function may be lost and injury 

may be caused by fire or electrification. 

  When gas detector actuates, shut-off main cock and inform gas company. Never put any objects which may cause 

fire and static electricity, closer to the control panel. 

   They may cause fire. 

 

 

Caution on Safety at Maintenance and Inspection Time

 

 

 

 

CAUTION

 

  Please avoid installation of this equipment where ambient temperature exceeds 40

  and below 0

, otherwise 

this may cause fire and electrification and also equipment function may be lost. 

  When any trouble condition is found, please contact and consult with us, engineering works company or 

maintenance contract company, otherwise this may cause fire and electrification and also equipment function 

may be lost. 

  Please secure effective space to enable switch operation in case of emergency, otherwise this may cause fire and 

electrification and also equipment function may be lost. 

  Switch operation shall be carried out in accordance with the attached Operating Instruction Manual and 

explanation label attached to the equipment, otherwise this may cause fire and electrification and also equipment 

function may be lost. 

WARNING

 

  When you change standby battery, please connect plus to plus and minus to minus securely and avoid causing 

short-circuit between electrodes. Short-circuit between electrodes causes liquid leakage, heat generation, injury or 

damage by burst. 

CAUTION

 

  Do not install equipment where a lot of vibration, noise, humidity, dust exist and corrosive gas can be generated, 

otherwise this may cause fire and electrification and also equipment function may be lost. 

  In case effects of thunderstorm, earthquake and flood damage are worried, equipment maintenance and 

inspection shall be carried out in consultation with maintenance contract company, in addition to statutory 

regular inspection. 

   Otherwise this may cause fire and electrification and also equipment function may be lost. 

  When you exchange a detector, tightly fix to the socket by turning the detector until it clicks. If not, a detector 

may not function properly.   

  Life of standby battery (Nickel Cadmium battery) is about 5 years. Please replace as appropriate by checking its 

period in use, otherwise, it may not function properly.   

  When you clean equipment, please be careful not to touch switches by mistake. 

   Also confirm that the equipment is at normal monitoring condition all the time, otherwise this may cause fire and 

electrification and also equipment function may be lost. 

  When you exchange a fuse, first shut-off power supply, then replace with specified current capacity fuse. If you 

use a fuse other than specified capacity, it may catch fire and cause trouble. 

  Insulation resistance test shall be conducted only after applying necessary procedures for high voltage fracture 

prevention, otherwise it may cause trouble. 

1. Caution on Safety 

Содержание 1PM3-nLA





















Отзывы: