Nittan 1PM3-nLA, Руководство по эксплуатации

Страница: 10 / 20

8
1. Identify fire zone by zone alarm indicator.
2. Rush to the site and upon confirming the fire condition, take appropriate course of action such
as initial fire fighting, report, evacuation and guidance etc.
1. First silence panel alarm sounder and zone alarm bell.
2. Then confirm the following at the zone, for which zone alarm indicator is turning on.
a) whether manual alarm station is pressed or not.
If pressed, pull back the push button and reset.
b) whether detector is operated or not.
Detector equipped with confirmation light is turning on its confirmation light.
In this case, check environmental condition of detector surroundings.
This will help clarify causes of unwanted alarms and formulate its prevention measures.
3. Open front switch cover and press “Reset” switch to reset side and confirm that zone alarm
indicator turns off.
When fire alarm sounds, please carry out the following procedures, without panic.
If alarm is not for fire (unwanted alarm, false alarm), please carry out the following procedures.
If the system does not return to normal monitoring condition after the above operation, urgently
contact inspection company.
3. Condition of Monitoring Time and Fire Alarm Time