Nissei GTR MID F Series, Подробное руководство пользователя

Страница: 12 / 49

Figure. Attachment Using an Endplate
(Customers need to provide their own endplates and bolts.)
Note) Please understand that mounting of resin cover which is the F Series accessory is unavailable.
[2] When the driven shaft has no steps
Figure. Attachment Using a Spacer and Retaining Ring
(Customers need to provide their own spacer, positioning spacers, bolts, and retaining rings.)
Note)
In addition, please take safety measures such as applying a protective cover so that there is no
entanglement at the output shaft.
Make sure there is a gap between the outer diameter of the spacer and the internal diameter of the
hollow shaft. If the fit is too tight and the outer diameter of the spacer is inaccurate, axial runout of
the driven shaft and hollow shaft can result.
The positioning spacer is used to position the reducer. It is not required if you know the length of
the driven shaft in advance. In addition, attaching the positioning spacer allows for smooth removal
from the hollow shaft. (Refer to "
■
Removal from the hollow shaft" on next page for more on
removal from the hollow shaft.)
P
a
rt
n
e
r
m
a
c
h
in
e
Endplate
Bolt
P
a
rt
n
e
r
m
a
c
h
in
e
Bolt
Spacer
Retaining Ring
Positioning Spacer
Fix the driven shaft between
pillow block bearings.
Fix the driven shaft
between the pillows.
12