Nissei GTR MID F Series, Подробное руководство пользователя

Страница: 8 / 49

Pay attention to the following points as installation quality affects the lifespan of the gearmotor.
2. Transportation
DANGER
Do not enter underneath the product when it is lifted for transportation.
Otherwise, injury accidents caused by dropping may occur.
CAUTION
Dropping and falling of the product on transportation is dangerous. Please pay sufficient attention.
For the gearmotor with a hanger, be sure to check that the hanger is not loose before using it.
However, do not lift a machine with the hanger after the gearmotor is mounted to the machine.
Otherwise, hanger damage, injury with dropping/falling and device damage may occur.
3. Installation
CAUTION
Do not place flammable items around the gearmotor. Otherwise, fire may occur.
Do not place obstacles that disturb ventilation around the gearmotor.
Cooling for the gearmotor may be disturbed and burn/fire may occur with abnormal overheating.
Check the weight of the gearmotor with the nameplate, package box, appearance diagram, catalog,
etc. Do not lift the gearmotor whose mass is more than the rated load of the hanger. Otherwise,
bolt damage, injury with dropping/falling and device damage may occur.
If the package is made of wood, it is unstable to shovel up the package from the bottom of it when
a lift is used. It is recommended to use the belt.
Do not move the gearmotor by holding the terminal box. Otherwise, injury and device damage may
occur.
Wear debris of the brake, iron powder (metal pieces), etc. may be scattered. Mount a damage
preventive device for a food machinery, etc. which will be defective due to contamination of foreign
substances. Otherwise, the product, etc. may be defective.
The guidance value of vibration from the mounting surface of the gearmotor or applied externally is
0.5 G or less.
Dew condensation may occur inside of the box if the ambient temperature rapidly changes under
high temperature/humidity atmosphere.
Pay attention to the transportation atmosphere because dew condensation especially occurs easily
on sea transportation such as a ship.
Dew condensation is a phenomenon where steam is condensed to be water drops and attach to
terminals when atmosphere temperature rapidly changes from high to low under high
temperature/humidity or the reducer is rapidly moved from low temperature to high temperature.
Do not step on/hang on to the gearmotor and terminal box Otherwise, injury may occur.
Do not touch keyways of the shaft end part, internal diameter part, etc. of the gearmotor with a bear
hand. Otherwise, injury may occur.
Install a damage preventive device such as an oil receiver for a food machinery and other devices
for which especially oil must be avoided in case of possible oil leakage in the event of failure,
service life, etc. Otherwise, products may be defective with oil leakage.
Pay attention to freezing under low temperature of 0°C or lower.
Freezing is a phenomenon where water becomes ice when atmosphere temperature becomes
lower than 0°C while water attach to terminals under dew condensation and abnormally high
humidity. Pay attention to electric shocks as freezing may cause a short circuit between terminals.
8