Nissei A-BLPQ010S2-V2, Инструкция по эксплуатации

Страница: 58 / 75

58
Pn205 Inertia moment ratio
Set the inertia moment ratio connected to the motor.
For set value, enter the load inertia moment ratio of motor input shaft conversion regarding the rotor inertia.
Load inertia moment of motor input shaft conversion
■ Comparison constants
Constants related to comparison of output functions
Pn210 Speed matching level
Set the range to output the speed matching signal.
When the difference between motor rotation speed and rotation speed command value is within ± (set value),
the speed matching signal is output.
Pn211 Speed detection level
Set the rotation speed to be compared with the motor rotation speed.
When the motor rotation speed exceeds the set value, the specified speed over signal will be displayed.
Pn212 Speed detection hysteresis width
Set a range to maintain the output ON status of the specified speed over signal.
● Speed detection output specifications
Following is the relationship of output signals with Pn210
～
Pn212.
x
100
When the output is set to ON and if the motor rotation speed comes down up to the set value (%) for speed detection
level (Pn211), the output status will be OFF.
Pn205
=
Inertia moment of rotor
Speed matching width
(Pn210)
Speed detection level
(Pn211)
Speed detection
hysteresis width
(Pn212)
ON
ON
OFF
OFF
Speed matching signal
Specified speed
over