7.
With cap removed, turn Control
Solution bottle upside down.
Gently squeeze one drop of Control
Solution onto a clean tissue. Wipe
off bottle tip with the tissue.
Note:
If Test Strip is removed before testing
is finished, an error message appears.
Discard old Test Strip. Use new Test
Strip for testing.
8.
Gently squeeze a drop of Control
Solution onto a small piece of
unused aluminum foil or clear
plastic wrap. Discard foil or plastic
wrap after use.
Note:
Do not put drop on top of the Test
Strip.
9.
With Test Strip still in Meter, touch
Sample Tip to top of the drop of
Control Solution. Allow drop to be
drawn into Test Strip. Remove Test
Strip from drop when dashes appear
across Meter Display. Meter is testing.
Note:
If Meter does not begin testing soon after
drawing up sample, discard Test Strip.
Repeat test with new Test Strip. If problem
persists, see
Troubleshooting
.
10.
After testing is finished, the result appears in the
Display.
18
Meter Testing
Drop Symbol