D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.)
12
4) Black Mark Printing Specifications
Mark Print position
*NOTE1
The center of Sensor set by Mark Sensor is reference position.
Mark Width(Min)
*NOTE1
left and right 7.5mm
（
Min 15mm
）
from reference position
Height of Mark (Min)
5mm
Printing Side
Not Printing Side
PCS value
0.9
Reflectance Ratio
Reflectance less 7% of 900nm (infra-red)
Preprint limited Area
*NOTE1
Preprint with dark color is prohibited on the area on left and right
7.5mm from reference position. When using preprinted paper, fully
confirm before using.
*NOTE1
: In case you set sensor 3 as “Mark Sensor” with using paper width 76mm, a few of the
specifications will be changed as follows.
Mark Print Position
Paper edge on Sensor 3 side is reference position.
Mark Width (Min)
10mm from reference position.
Preprint Limited Area
Pre-print with dark color is prohibited on the area of 10mm from
the reference point. Fully confirm when using preprinted paper.
