D-F10120 NP-F369 Product Spec Rev.0.01(Provisional Ver.)
7
2.2
Paper Specifications
1) Paper width and thickness
NP-F369
Paper
width
80
-1
mm
Paper
thickness
59
～
150
μ
m
【
Notice
】
・
DO NOT change paper width from narrow to wide during operation. (In case you use
narrower paper than width of thermal head, the uncovered part by paper on thermal head
grazes directly with platen roller and the thermal head could be destroyed.)
・
All of the paper widths are set as default setting.
・
Please consult with us when using paper width 82.5mm.
2) Paper form .
・
Form shall be roll one.
Max O.D
Paper
thickness
Core I.D
Core O.D
φ
150mm
59
～
150
μ
m
φ
25.4mm
φ
33.4mm
【
Notice about paper
】
・
Use Thermal paper.
・
DO NOT stick end of paper with glue and scotch tape.
・
The core of roll paper should not be deformed.
・
The core should not be stuck out over the side of the paper roll.
・
DO NOT keep paper rolls under condition of high heat and humidity.
・
Roll paper is not loosened.
・
Printing surface shall be outer surface. (Involute paper is not applicable.)
・
Be careful when using pre-printed papers. Especially, a sensor is on unprinted side.
・
Use of paper kept for a long time may not satisfy print quality . Do not use such a paper.
