A - 22
Nil
fi
sk Liberty SC50 - 56091197
12/2017
INSTRUCTIONS FOR USE
A - ENGLISH
9/2018
LOCATION TAG
The machine uses a Location Tag to identify its “Home Position” within the building.
IMPORTANT!
No plans can be created until the location tag has been installed and identi
fi
ed by the machine.
1
See Figure 2-2.
The Location Tag
(44)
should be mounted permanently on a wall where the machine will have an unobstructed view of it,
preferably near where the machine will be charged every day.
2 Place the location tag in an area where there are not movable objects (i.e. garbage cans or other equipment). The machine records
information when setting the home position, if there are new obstacles each time within the vicinity of the location tag, the recorded plan will
shift.
3 Mount the Location Tag to the wall at a maximum height of 4’ (1.2 m). This ensures the tag will be within view of the machine’s 3-D camera
(3-D camera cannot see above the height of the steering wheel). The machine must be driven to the location tag and parked perpendicular to
the wall to properly read the tag. Park the machine about 3’ (1m) away from the tag.
4 The top edge of the Location Tag must be level with the
fl
oor.
5 If a machine is operated on multiple
fl
oors of a building, it will need a unique location tag for each
fl
oor. In a building with four
fl
oors, four
different Location Tags would be required; one for each
fl
oor.
6 If the area to be cleaned is very large more than one location tag may be needed per
fl
oor. Have a location tag within 10-20m of the path
start if at all possible.
7 If a machine is operated in multiple buildings, it will need a unique location tag for each
fl
oor of each building.
FIGURE 2-2
Max. 4'
(1.2 m)
~ 3'
(1 m)
44