12
12
12
12
12 - FORM NO. 56043089 / AquaRide
™
/ BRX 700
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
The controls on the AquaRide
™
/ BRX 700 were designed with
one touch operation in mind. For single pass extracting the user can
simply depress one switch and all systems on the machine will be ready to go.
For most single-pass extracting operations, the operator should only need to use the top three switches on the control panel. These
are the Scrub System Off, Maintenance Extract Mode, and Restoration Extract Mode switches. In the maintenance mode the solution
spray is directed at the scrub brush and the flow rate is reduced. The travel speed is limited to a medium speed. In the restoration
mode the solution spray is directed at the carpet ahead of the scrub brush and the flow is at maximum. The travel speed is limited
to a slow speed.
Scrub System Off Switch
Scrub System Off Switch
Scrub System Off Switch
Scrub System Off Switch
Scrub System Off Switch (((((B
B
B
B
B))))) - Pressing this switch when the scrub system is active will cause the following to occur:
•
The scrub brush(s) will turn off and the scrub deck will raise to the up position
•
The solution flow will be stopped
•
The vacuum will shut off after a 10 second delay
•
The travel speed limit will return to the transport speed setting
Maintenance Extract Mode Switch (
Maintenance Extract Mode Switch (
Maintenance Extract Mode Switch (
Maintenance Extract Mode Switch (
Maintenance Extract Mode Switch (D
D
D
D
D)
)
)
)
) – If the scrub system is off, pressing this switch will cause the following to occur:
•
The scrub system will be enabled with the system configured for maintenance mode and the scrub deck will be lowered
•
The vacuum system will be enabled
•
The solution system will be enabled for maintenance mode
•
The travel speed will be limited to the maintenance mode speed setting
•
As soon as the throttle is moved from the neutral position the scrub brush(s) will start turning and the vacuum will turn on. If the
direction is forward the solution flow will start. If the direction is reverse the solution flow will be stopped. It is possible to program
the control to automatically raise the scrub deck in reverse. Refer to the Electrical System
“Main Control Board Special Program
Options” for details.
If the restoration mode is selected, pressing this switch will select the maintenance mode. If the maintenance mode is already
selected, pressing this switch will have no effect.
Restoration Extract Mode Switch (
Restoration Extract Mode Switch (
Restoration Extract Mode Switch (
Restoration Extract Mode Switch (
Restoration Extract Mode Switch (F
FF
FF)
)
)
)
) – If the scrub system is off, pressing this switch will cause the following to occur:
•
The scrub system will be enabled with the system configured for restoration mode and the scrub deck will be lowered
•
The vacuum system will be enabled
•
The solution system will be enabled for restoration mode
•
The travel speed will be limited to the restoration mode speed setting
•
As soon as the throttle is moved from the neutral position the scrub brush(s) will start turning and the vacuum will turn on. If the
direction is forward the solution flow will start. If the direction is reverse the solution flow will be stopped. It is possible to program
the control to automatically raise the scrub deck in reverse. Refer to the Electrical System
“Main Control Board Special Program
Options” for details.
If the maintenance mode is selected, pressing this switch will select the restoration mode. If the restoration mode is already selected,
pressing this switch will have no effect.
KNOW YOUR MACHINE
KNOW YOUR MACHINE
KNOW YOUR MACHINE
KNOW YOUR MACHINE
KNOW YOUR MACHINE
