
Before use
34
Before use
Assembly
WARNING!
Prior to assembly, make sure that the mains plug is unplugged.
If the mains plug is plugged in, the appliance could accidentally
be switched on, resulting in injuries.
ATTENTION!
Check if all filters have been inserted properly before using the
appliance. The appliance must not be used without filters.
Remove the appliance and the accessories from the packag-
ing and release both canister clips (fig. 1).
Remove motor head from the canister by means of the carry-
ing handle.
Take off the textile filter.
Remove contents from the canister.
Insert the filter which is required for the intended cleaning
task (wet or dry vacuuming).
Install motor head on canister and fasten canister clips.
Push the end of the suction hose into the suction socket of
the canister as far as it will go. For removal press the lateral
positioned slider outwards.
Place on the required suction accessory.