56
Features That Can Be Set Using the Multi Selector
Shoot
ing Features
Using the Flash (Flash Modes)
You can shoot pictures with a flash by raising the flash. You can set a flash mode
that suits the shooting conditions.
1
Press the
m
(flash pop-up) button to raise the
flash.
•
When the flash is lowered, flash operation is disabled
and
S
is displayed.
2
Press
H
(
m
flash mode) on the multi selector.
3
Use the multi selector to select the desired
mode and press the
k
button.
•
See “Available Flash Modes” (
A
57) for more
information.
•
If the
k
button is not pressed within a few seconds,
the selection will be canceled.
•
When
U
(auto) is applied,
D
is only displayed for
a few seconds even if monitor indicators (
A
9) are
turned on.
4
Frame the subject and take a picture.
•
The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On:
The flash will fire when you press the
shutter-release button all the way.
- Flashing: The flash is charging. The camera cannot
take pictures.
- Off:
The flash will not fire when a picture is
taken.
•
If the battery is low, the monitor will be turned off while the flash is charging.
Auto
Содержание COOLPIX P520
Страница 1: ...En Reference Manual DIGITAL CAMERA ...