F
8
Troubleshooting
Tec
h
nica
l N
otes and
Ind
e
x
Monitor or
viewfinder is blank.
•
Camera is off.
•
Battery is exhausted.
•
Standby mode for saving power: Press the power switch,
shutter-release button,
c
button or
b
(
e
movie-record)
button, or rotate the mode dial.
•
Monitor and viewfinder cannot be used simultaneously. It may
take some time to switch between monitor and viewfinder.
•
Camera and computer are connected via USB cable.
•
Camera and TV are connected via audio/video cable or HDMI
cable.
•
Interval timer shooting in progress.
23
22
23
8
87, 90
87,
E
17
E
36
Monitor screen is
hard to see.
•
Ambient lighting too bright: move to darker location or use
viewfinder.
•
Adjust monitor screen brightness.
•
Monitor is dirty. Clean monitor screen.
8
103,
E
67
F
6
The viewfinder is
hard to see.
Adjust diopter adjustment control.
8
Date and time of
recording are not
correct.
•
If the camera clock has not been set (“Date not set” indicator
flashes during shooting), still pictures have a time stamp of
“00/00/0000 00:00”; and movies are dated “01/01/2013 00:00.”
Set the correct date and time using
Time zone and date
in
the setup menu.
•
The camera clock is not as accurate as a normal clock, such as
watches. Check camera clock regularly against more accurate
timepieces and reset as required.
24, 103,
E
65
103,
E
65
No information
displayed on the
monitor.
Shooting and photo information may be hidden. Press the
s
button until shooting information or photo information is
displayed.
9
Print date
not
available.
Time zone and date
in the setup menu has not been set.
24, 103,
E
65
Date not
appearing on
pictures even
when
Print date
is
enabled.
•
A shooting mode that does not support print date is selected.
•
Another function that is set now is restricting the print date.
•
The date cannot be imprinted onto a movie.
103,
E
68
75
–
Screen for setting
time zone and
date is displayed
when camera is
turned on.
Clock battery is exhausted; all settings were restored to their
default values.
25
Camera settings
reset.
Reset file
numbering
cannot be done.
Reset file numbering
cannot be applied when the folder
number reaches 999 and there are images in the folder. Change
the memory card, or format the internal memory/memory card.
105,
E
78
Problem
Cause/Solution
A
Содержание COOLPIX P520
Страница 1: ...En Reference Manual DIGITAL CAMERA ...
