Nikon COOLPIX AW1100, Быстрый старт

Страница: 116 / 299

50
Features That Can Be Set Using the Multi Selector
Shoot
ing Features
Using the Flash (Flash Modes)
You can set a flash mode that suits the shooting conditions.
1
Press
H
(
m
flash mode) on the multi selector.
2
Press the multi selector to select the desired
mode and press the
k
button.
• See “Available Flash Modes” (
A
51) for more
information.
• If the
k
button is not pressed within a few seconds,
the selection will be canceled.
• When
U
(auto) is applied,
D
is only displayed for
a few seconds regardless of Photo info settings
(
A
94).
3
Frame the subject and shoot.
• The flash lamp indicates the status of the flash when
you press the shutter-release button halfway.
- On: The flash will fire when you press the shutter-
release button all the way.
- Flashing: The flash is charging. The camera cannot
take pictures.
- Off: The flash will not fire when a picture is taken.
• If the battery is low, the monitor will be turned off
while the flash is charging.
C
Effective Range of the Flash
The flash has a range of about 0.5 to 5.2 m (1 ft 8 in. to 17 ft) for wide-angle position, and about 0.5 to
4.5 m (1 ft 8 in. to 14 ft) for telephoto zoom position (when
ISO sensitivity is set to Auto ).
Auto