{
The shutter is released when the
SHUTTER RELEASE
button is fully depressed, the camera
beeps
once and
the picture is taken.
{
Immediately after a picture is taken, the Green LED flashes and
(
Quick delete
) and (pause, ) are
briefly displayed in the Monitor after which the Monitor will return to normal and the next shot can be taken.
{
It is normally possible to take a picture when the shot is still being displayed in the Monitor. Lightly pressing the
SHUTTER RELEASE
button resets the Monitor to normal display and subsequent shots are possible unless
(Wait) is displayed. The number of shots that can be taken may vary, depending on the Image size and
Image quality
.
is displayed on the Monitor while image is being recorded on the CF memory card.
NOTE :
Recording on CF Memory Cards
The Green LED flashing at intermediate speed indicates that the image is being written to the CF memory card. Do not
remove the card, battery or AC Adapter until the Green LED has gone out, or image data may be damaged or not
recorded.
Built-in Speedlight
Use the built-in Speedlight if there is insufficient light to illuminate the subject. This condition is indicated by the Red
LED flashing rapidly when the
SHUTTER RELEASE
button is half-pressed.
To use the Speedlight
1. Slide the Speedlight lock-release lever to release the built-in Speedlight.
2. Confirm the Red LED is steady, then gently depress the
SHUTTER RELEASE
button fully to take the picture
with the built-in Speedlight.
Image size
Image quality
Number of shots that can be taken
FULL
NORMAL
4
VGA
BASIC
77
Page 40 of 136
Nikon COOLPIX995 Digital Camera
3/15/2002
http://www.livemanuals.com/packages/products/NK002/2136/manual/fullmanual.html
