1.
Set the camera to Auto Mode (Set the
MODE
dial to
).
{
The camera beeps once when the power is turned on and standby operation starts. After a short pause, the
camera is ready and the Viewfinder image is displayed on the Monitor.
{
Individual function settings and the number of images that can be fitted on the CF memory card are displayed
in the Control panel and Monitor.
MONITOR
button
Pressing the
MONITOR
button changes the display in the following order (example in
mode):
2.
Compose your picture.
{
Aim the lens at the subject and compose the picture in the Monitor or Viewfinder.
1. Parallax compensation marks for close-ups (Macro)
2. Autofocus target area
{
When shooting in
mode, the camera will use the subject in the center of the picture as the focus target.
NOTE :
Composing using image in Viewfinder.
When composing a picture using the image in the Viewfinder, the actual image recorded is shifted slightly (due to a
phenomenon known as parallax) compared to the image in the Viewfinder. Especially when shooting close-ups, the
effect of parallax becomes more pronounced and the edges of the image seen in the Viewfinder image may not be
included. Use of the Monitor is therefore recommended for close-up (Macro) shooting at distances of less than 90
cm/35 in. The parallax compensation marks in the Viewfinder indicate the compensation required when the subject to
camera distance is 60 cm/24 in.
Zoom button
{
Use the
ZOOM
button to frame your subject in the Monitor or Viewfinder.
Page 38 of 136
Nikon COOLPIX995 Digital Camera
3/15/2002
http://www.livemanuals.com/packages/products/NK002/2136/manual/fullmanual.html
