Camera Setup:
Customizing Camera Contr
ols
88
Function Buttons
By default, the
(FUNC.1 ) controls
exposure mode, the
(FUNC. 2) but-
ton exposure compensation. Using the
FUNC 1
and
FUNC 2
menus, you can
assign different functions to these buttons
in M-REC mode. For example, assigning white balance or me-
tering to either button makes it possible to adjust these set-
tings without using the menus. Alternatively, you can assign the
functions of the
or
buttons to the FUNC. 1 or
FUNC. 2 buttons, putting these functions where they can be
easily adjusted.
MENU
O F F
1
2
S
FUNC. 1
SELECT
SET
Mode
Metering
White Balance
Exposure mode
Focus
Flash settings
Sensitivity
White balance
Exposure compensation
Metering
Exposure options
For more information on:
The following functions can be assigned to either button:
Option
Function Assigned
Mode
Exposure mode
Focus mode/manual focus (functions in
same way as
button)
Flash setting/sensitivity (functions in same
way as
button)
Exposure mode can not be used unless
Mode
is assigned to one of the
two buttons. If neither button is assigned the exposure compensation
function, exposure compensation can only be adjusted using the
Exp. +/–
item in the M-REC EXPOSURE OPTIONS sub-menu.
White
Balance
White balance (press while turning com-
mand dial to select white-balance program;
while button is pressed,
W-BAL
indicator
and white-balance program are displayed in
control panel shutter-speed/aperture
display as follows:
Pre
= Preset [restores
last recorded preset white value],
Sun
= Fine,
Inc
= Incandescent,
Flu
= Fluorescent,
Clo
= Cloudy,
Fla
= Flash, no display = Auto)
Exposure compensation
Metering
Metering method (press while turning
command dial to select metering method)