Nikon COOLPIX 885, Руководство пользователя

Страница: 28 / 105

55 54
This section details the basic steps involved in taking pictures in AUTO
and SCENE modes. In these automatic, “point-and-shoot” modes, the
majority of settings are controlled by the camera in response to lighting
conditions and focus distance, producing the best possible results.
Taking Pictures
The Basics
Step Page
Step 1 Ready the Camera 55-56
Step 2 Adjust Camera Settings (Optional) 57
Step 3 Compose the Picture 58-59
Step 4 Focus and Shoot 60-61
Step 5 Check the Results 62
Step 6 Turn the Camera Off 62
Assisted Creative Photography:
Step 7
Select Scene Mode
63-67
Step 1—Ready the Camera (Auto Mode)
Before using your camera, complete the following steps:
1 Remove the lens cap
• If you turn the camera on with the lens cap in place and the mode dial set to
AUTO, SCENE, CSM or m , an error message will appear in the monitor. To
clear this message from the display, turn the camera off and remove the lens
cap.
2 Turn the mode dial to
a
3 Turn the camera on
• The lens zooms out when the camera is turned on
and the green light next to the viewfinder will turn on
for a few seconds. After a short pause, the view
through the lens and camera settings will appear in
the monitor.
Tutorial—T
aking Pictures
COOLPIX885 (E) 01.10.22 6:00 PM Page 54