Nikon CoolPix 2000, Руководство пользователя

Страница: 94 / 104

84
Technical Notes
Monitor is hard
to read
• Ambient lighting too bright: go to darker location
or use HL-CP11 monitor hood (sold separately).
• Monitor is dirty.
• Monitor brightness requires adjustment.
80
82
75
Photos are too bright
(overexposed)
• Exposure compensation is too high. 63
Photos are too dark
(underexposed)
• Flash is off.
• Flash window is blocked.
• Subject is outside range of flash.
• Exposure compensation is too low. 43
19
90
63
Photos are out of focus
• Main subject was not object closest to camera when
shutter-release button was pressed halfway.
20
Problem Possible cause
No photo is taken
when shutter-release
button is fully pressed
• Camera is in playback mode.
• Battery is exhausted.
• Message “Memory Card full” appears in monitor:
not enough memory remaining to record further pic-
tures at current settings.
• AF
●
indicator flashes red: camera unable to focus.
• Flash-ready lamp flickers: flash is charging.
• Message “Memory Card is not formatted” appears
in monitor: memory card is not formatted for use in
COOLPIX 2000.
• Message “No Memory Card” appears in monitor:
no memory card in camera.
46
17
17
20
20
75
10
Photos are blurred
• Camera shook during shot. Blurring caused by cam-
era shake can be reduced by:
– Using the flash
– Zooming the camera out
– Using the Best-Shot Selector (BSS)
– Using the self-timer
– Using a tripod
43
42
62
41
—
Randomly-spaced
bright pixels (“noise”)
appear in image
• Shutter speed too slow. Use the flash.
• Noise reduction, which helps reduce noise at slow
shutter speeds, is available in (Night Portrait)
mode. Using this scene when appropriate can re-
duce noise.
43
27