![background image](http://html1.mh-extra.com/html/niko/10-512/10-512_manual_1689542043.webp)
43
10-512
EN
Deblocking the set program-
ming
Note!
First enter the power supply mo-
dule’s programming mode. Then
carry out steps 1 up to and incl.
4. Then exit the power supply mo-
dule’s programming mode.
Return to default settings
Press the door opener key
for 8s.
Step 4:
Exit the internal unit’s programming mode
Briefly press function key 3 to exit the internal unit’s programming mode. The programming mode is
automatically exited if no key is pressed for 8s.
* NotE:
When taking the system into use, you can set the ring tone of the external unit
(see ‘POSSIBLE SETTINGS’). If you wish to distinguish between the ring tones of 2 external
units, carry out this programming. From then on, you ALWAYS have to set the ring tones
for both external units separately!
You can also program the settings described above via the service set 10-870 (see user
manual service set).
Programming the extension module
Step1:
Enter the internal unit’s programming mode
Press function key 3 of the basic module for 8s until you hear a beep in con-
firmation and the first 7 LEDs of the extension module blink.
Let go of the func-
tion key.