![background image](http://html1.mh-extra.com/html/niko/10-512/10-512_manual_1689542037.webp)
37
10-512
EN
LED indication basic module
Meaning
The red LED lights continuously.
The ring tone is switched off.
The red LED blinks 3x in 6s.
The line is busy. Put the receiver down and try
again later.
The green LED lights continuously.
- There is a call.
- A speech connection is established because
the receiver was picked up.
- The ring-and-come-in function is activated.
- The reroute function is activated
LED indication extension module
See further programming possibilities per function key: extension module.
Programming possibilities per function key:
a. Basic module:
- door open key
- standard function: switching door open relay
- switching light relay (for programming and operation, see user manual bus power
supplies 10-801/10-802 and service set 10-870)
- floor door open function (see ‘Programming without service set (10-870)’)
- function key 1 (see ‘Programming without service set (10-870)’):
- sending control function 8
- making an internal call
- (de)activating ring-and-come-in function
- (de)activating reroute function
- function key 2 (light switch key)
- standard function: switching light relay
- function key 3
- standard function: switching ring tone on/off
Note: per key, only one programming can be carried out!
B. Extension module:
Per function key, one of the functions below can be programmed.
1. communicating with a specific external unit + switching door open relay
A function that enables communication with the external units in a system. If you pick
up the receiver of the internal unit, you can choose with which external unit you wish
to program by pressing the previously programmed function key (see programming
the extension module). The chosen function key is linked to the external unit. The red
indication LED lights and you can communicate. Press the function key once again to
switch the door open relay.
Thanks to this function, you can see from which programmed external unit the call