![background image](http://html1.mh-extra.com/html/niko/10-512/10-512_manual_1689542039.webp)
39
10-512
EN
PoSSIBLE SEttINGS
Switching off the ring tone on the internal unit
Press function key ‘3’. The red LED lights if the ring tone is switched off.
Modifying the volume of the ring tone
Use the setting wheel at the bottom of the internal unit (fig.5) to modify the volume.
Modifying the ring tone of the internal unit
Call from an external unit:
As for the Liberty internal unit, you can choose from 13 different ring tones. Press function
key 3 for ±8s. You hear a beep in confirmation of the setting. Press the blue door opener
key. The red and green LEDs light.
Call from external unit 1:
Press the blue door opener key to hear the first ring tone. With each new press on the blue
door opener key, you hear the next ring tone. To save the desired ring tone, wait until both
LEDs go out (±8s) and you hear a beep in confirmation of the setting.
Call from external unit 2:
If you modify the ring tone of external unit 1, the ring tone for external unit 2 is also auto-
matically modified. To set a different ring tone for every external unit, see: ‘Programming
without service set (10-870)’.
Connecting a floor bell push button and modifying its ring tone
Optionally, you can connect a floor bell push button (a push button with N.O. contact e.g.
05-540) to the internal unit. Use terminals ‘E’ and ‘P’ of the screw connector (see fig.6).
fig.6: connecting a floor bell push button
Note:
Remove the lamp from the floor bell push button. If you do not remove the lamp, it
continuously uses power and you can no longer make a call!
Press function key 3 (of the basic module) for 8s to modify the ring tone of the internal
unit that is connected to the floor bell push button. You hear a beep in confirmation of the
setting. Press the blue door opener key. The red and green LEDs light. Then press function
key 2 (of the basic module) to hear the first ring tone. With each new press on function
key 2 (of the basic module), you hear the next ring tone. To save the desired ring tone,
wait until both LEDs go out (±8s) and you hear a beep in confirmation of the setting. The
last heard ring tone is then saved.
12V 1A max
12V 1A max
10-512
1 2 3 4 5 6 7 8 9 10 11 12
14 15 16 17 18 19 20 21 22 23 24 25
13
230V~
a b
P R
10-152
05-540
05-540
10-512