
EN
60
10-362
Enter code number
Enter a 1- to 4-digit code in the code lock module.
Confirm using smart key
or # on the code lock module.
• If the code is valid, the door opener is activated (image 25).
• If the code is invalid, the door opener is not activated (image 26). Press the
smart key
to enter the code again.
• If you enter the wrong code three times in a row, the code entering function
is locked during 3 minutes.
Image 24: 4-digit code
Image 25: Entered code is correct
Image 26: Entered code is wrong
a) Make a selection and record code using Niko Configuration SW (access control > code lock module 10-363: keyboard mode).
9. RESTORATIONS
9.1. Replace the EEPROM
All configuration data and the resident database are stored on a permanently installed EEPROM. The data will also be copied to the removable EEPROM after
each configuration.
If you have to replace the display module, you can remove the removable EEPROM from the defect and integrate into the new module.
Switch off the power supply voltage on the external unit.
Содержание 10-362
Страница 2: ...10 362 03 Nederlands 18 Fran ais 33 Deutsch 48 English 63 Sloven ina...
Страница 78: ...10 362 Notes...
Страница 79: ...10 362...