
55
EN
10-362
6. INITIAL ACTIVATION
6.1. Operating mode
P
ossible functions
Selection
Resident list
Entr
y
Flat number
Entr
y code
Selection
First letter
Direct input of the
call number for
10-850
a)
Release of the call
number with control
function for 10-850
b)
Operating mode
Standard
(stand-alone)
X
-
-
X
-
X
Basic
(with code lock module)
-
X
X
-
X
X
Extended
(with code lock module)
X
X
X
X
-
X
a) Only possible if AD2 mode is deactivated and code lock module is connected. The 10-digit call number can be entered directly using the code lock
module.
b) Only possible if AD2 mode has been activated. To release the call number, you must select the name or the flat number.
Completely mount all functional modules and establish all internal connections. Completely install the devices of the installation.
In turn, check a-, b- and P-conductor against each other for short circuits.
Switch on the mains voltage.
Launch device
After switching on, you will see the following information on the screen during approx. 5 s:
• Device software version
• Device hardware version
• Device mode
The device mode is automatically recognized (Standard, Basic
or Extended).
• Type of the device
Image 6: Initialize device in Standard
Standby
10 s after switching on, the start screen will appear. The device is in standby mode.
When the device has just been delivered, the Niko logo appears
Standard
Image 7: Standby Standard
Содержание 10-362
Страница 2: ...10 362 03 Nederlands 18 Fran ais 33 Deutsch 48 English 63 Sloven ina...
Страница 78: ...10 362 Notes...
Страница 79: ...10 362...