
EN
56
10-362
Basic
(only with code lock module)
Image 8: Standby Basic
Extended
(code lock module)
Image 9: Standby Extended
7. CONFIGURATION
• The display module can only be configured using the Niko Configuration SW.
• Configuration using the keys or the service unit 10-870 is not possible.
• The end user, for example the building manager, can also use the Niko Configuration SW to update the name list.
• All configuration data and the resident database are stored on a permanently installed EEPROM.
• The data will also be copied to the EEPROM after each configuration. If necessary this memory can be deleted, without interrupting the functionality.
7.1. Factory settings
The device is equipped with an EEPROM, in which the following default settings are saved:
Mode backlight
automatic mode
a)
Start screen
Logo Niko
Database
no datasets
Temperature sensor
a)
deactivated
Temperature unit
°C (Celsius)
AD2 mode display
activated
10-850 direct dialling
deactivated
Activate preselection with first letters
deactivated
a) Temperature sensor: A single flush-mounting temperature sensor can be used.
7.1.1.
Preset times
Time-out for backlight in automatic mode
30 sec.
Error detection "key is locked" (key pressed for longer than 25 s)
25 sec.
7.2. Configuration options
Function
Niko Configuration SW
Draw up resident list (allocation of the 1
st
and 2
nd
internal unit by name and number)
x
Set ExtU address
x
Activate temperature display
x
Display temperature in °F (Fahrenheit)
x
Activate AD2 mode
b)
x
Содержание 10-362
Страница 2: ...10 362 03 Nederlands 18 Fran ais 33 Deutsch 48 English 63 Sloven ina...
Страница 78: ...10 362 Notes...
Страница 79: ...10 362...