Nikken PiMag™ Water System (#1316)
Congratulations on your purchase of the most
advanced water system available today. The Nikken
PiMag Water System combines carbon purification,
microfine ultrafiltration, Nikken magnetic technology,
and ceramic elements that produce pi water, known
in Asia for more than 30 years as "the water of life."
This unique system is available only from Nikken.
The PiMag Water System is easy to install and
maintain. For installation, no changes to your
plumbing are necessary. Maintenance is as simple
as periodically replacing the cartridge-type filters.
Before beginning installation, please read this
owner’s manual.
IMPORTANT!
To maintain maximum performance and quality drinking water, all filters should be replaced at least once per
year, or more frequently, depending on the quality of your water supply.
The PiMag Water System is designed for use with cold water. Do not run warm or hot water through the system.
To keep your PiMag Water System operating at peak efficiency, read the instructions in this manual carefully.
If you have questions concerning the installation or operation of the water system, contact your Nikken
Independent Wellness Consultant.
The Nikken PiMag Water System is for countertop use only. Do not
connect the system to any household plumbing other than a faucet.
It is designed to connect to the end of the faucet
(
FIGURE 1
)
.
If there are any difficulties in installing or operating the system, refer
to the Troubleshooting section of this manual.
Components
The component parts of the system are as follows
(
FIGURE 2
)
:
1. Nikken PiMag Water System, with tubes and diverter valve (a)
2. Two tube ties
3. Selection of 3 faucet adapters, to fit different faucet sizes
4. Magna-Charger
5. Tool for filter replacement
Installation
The following installation instructions show you how to attach the
PiMag Water System to your faucet. Installation is quick and
simple.
1. If there is an aerator (a screen-type nozzle) on the end of your
faucet, unscrew and remove it.
2. Place the PiMag Water System diverter valve on the end of the
faucet. Use the supplied faucet adapter if necessary to provide
a good fit
(
FIGURE 3
)
.
3. Turn the textured collar ring counterclockwise until the diverter
draws up tightly against the faucet.
– 2 –
FIGURE 2.
FIGURE 3.
1.
2.
3.
4.
5.
Faucet
Adapter
Tube
Tie
Diverter Valve
FIGURE 1.
a.
Collar
Ring
