NIFTYLIFT NL140RKT, Руководство по эксплуатации

Страница: 8 / 43

NIFTY LIFT
Stabiliser Controls
NOTE: THE STABILISER LEGS WILL NOT OPERATE UNLESS THE TOP BOOM OF THE WORK
PLATFORM IS STOWED.
WARNING: DEFLATE AIRBAG SUSPENSION (IF FITTED) AND ENGAGE SPRING LOCKOUTS (IF
FITTED) BEFORE ENGAGING STABILISERS.
WARNING: THE WHEELS OF THE VEHICLE MUST BE RAISED CLEAR OF THE GROUND PRIOR
TO OPERATING THE BOOMS. FAILURE TO DO SO WILL RESULT IN THE MACHINE BEING
UNSTABLE, AND DANGEROUS, WHEN THE BOOMS ARE RAISED OR EXTENDED.
To operate the stab legs depress the deadman button, located next to the stabiliser direction control
valve, and, at the same time, push or pull the lever on the stabiliser control valve in the direction
corresponding to the desired motion.
WARNING: ENSURE THAT ALL GREEN L.E.DS (IF FITTED) ON THE ELECTRICAL JUNCTION BOX
NEXT TO THE STABILISER CONTROL VALVE ARE ON BEFORE OPERATING THE WORK
PLATFORM.
Spring Lockout Controls (If fitted)
NOTE: THE SPRING LOCKOUTS WILL NOT OPERATE UNLESS THE TOP BOOM OF THE WORK
PLATFORM IS STOWED.
WARNING: DEFLATE AIRBAG SUSPENSION (IF FITTED) BEFORE ENGAGING SPRING
LOCKOUTS.
To operate the spring lockouts depress the deadman button, located next to the stabiliser direction
control valve, and, at the same time, push or pull the lever on the spring lockouts control valve in the
direction corresponding to the desired motion.
WARNING: WHEN WORK IS COMPLETED, ENSURE THAT ALL STABILISERS AND SPRING
LOCKOUTS ARE IN THE STOWED POSITION. INFLATE AIR BAG SUSPENSION (IF FITTED).
Emergency Stops
In the event of imminent danger, loss of EWP control or a serious oil leak, depress one of the emergency
stop buttons. There are emergency stops located on both of the rear stabiliser legs and another one on
the base control cover of the work platform. Activating an emergency stop will divert all the flow from the
PTO pump back to the hydraulic reservoir and isolate all available flow from the accumulator (if fitted).
Once safe to do so, the emergency stop may be reset by twisting the button in the direction indicated on
it.
24.02.13