www.nkrowing.com.au
4
OPERATION
TURN ON
TWIST
Turn on amplifier and display. Increase amplifier volume.
Timer and stroke count will turn on in “STOP”. Stroke
Rate will operate.
TURN OFF
TWIST, ‘CLICK’
Turn off amplifier and display.
Decrease amplifier volume.
READY
PRESS
Ready timer and stroke count.
START
ROW!
Row to start timer and stroke count.
AUTOMATIC STROKE
MEMORY
Timer, stroke rate and stroke count will keep running
until stopped.
Timer will run to
59:59.99
then roll back to
0
.
Count will run to
999
then roll back to
0
.
Stroke rate will be stored in memory automatically every
10 seconds for approximately
60
minutes.
STORE/SPLIT
PRESS
Store split and rate manually.
Time will freeze so you can read split.
Timer continues internally and display resumes running
after 5 seconds.
STOP/RESTART TIMER
PRESS
Stop and restart time and stroke count at any time. Stop
time will be recorded as a split.
RECALL MEMORY
PRESS
MANUAL MEMORY REVIEW
PRESS
OR
-or-
AUTO MEMORY PLAYBACK
PRESS
Enter memory recall.
(Timer must be stopped.)
Manually step forward or backward through memory.
Time and rate will display for each 10-second interval .
Time, rate and cumulative stroke count will display for
each manually stored split. Stroke rate information is
an instantaneous snapshot, not averaged.
“Playback” memory automatically. Timer will run and
stored rate will display at each 10-second interval. Rate
and cumulative stroke count will display at each
manually stored split. Stroke rate information is an
instantaneous snapshot, not averaged.
EXIT/RECALL
HOLD
Exit recall.
CLEAR/ZERO
HOLD
Hold to clear memory and zero timers.
Timer must be stopped.
Must hold until
“CLEAr” disappears and display shows “0’s.”
