An example of setting “2”.
※Change of magnification setting is effective only for pressure reading. Set values for switching are not scaled automatically.
The multiplier factor setting is determined by the value of the third digit : the red −LED should be
flashing during the setting.
The analog output setting is determined by the value of the second digit:the green SW1 LED should
be flashing during the setting.
Sections containing an oblique stroke are multiplier factor that cannot be selected because of resolving power or display digits.
（Values will not be displayed automatically.）
Note:“A” is set prior to delivery.
An example of setting the R mode in the 104R range.
Note:G mode are set prior to shipment.
1
2
3
4
5
6
7
8
9
A
b
−1.0〜99.9
−1.0〜99.9
−0.01〜1.45
−0.10〜9.99
−1〜357
−1〜350
−0.01〜5.07
−0.1〜35.0
×0.0102
×0.01
×145
×0.001
Value selected
Pressure range（−Pr〜+Pr）
Muitiplier factor
104R
354R
Set the value of the third
digit to “2” using and
buttons.
In the operations mode, press
the and buttons simultaneously
to enter the Initial Settings Mode.
Press the button until
the − LED under the
third digit flashes.
Press the button for more
than one second to return
to the Operations Mode.
Value selected
1
2
R mode（Compound pressure output）
G mode（Positive pressure output）
Mode
−Pr 0 ＋Pr
(Vzero)
1V
1V
5V
5V
In the Operations Mode, press the
and buttons simultaneously to
enter the Initial Settings Mode.
Press the button until the
SW1 LED under the second
digit flashes.
Set the value of the second
digit to “1” using the and
buttons.
Press the button for more
than one second to return to
the Operations Mode.
4
Multiplier factor Setting
Analog Output Setting
