![background image](http://html1.mh-extra.com/html/nidec/leroy-somer-powerdrive-md2sl-1100t/leroy-somer-powerdrive-md2sl-1100t_installation-and-maintenance-manual_1687876003.webp)
3
Powerdrive MD2SL Installation and maintenance
5077 - 2017.12 / b
en
(In accordance with the low voltage directive 2014/35/EU)
Throughout the manual, this symbol warns of consequences which may arise from inappropriate use of the drive,
since electrical risks may lead to material or physical damage as well as constituting a fire hazard.
1 - General
Depending on their degree of protection, the variable speed
drives may contain unprotected live parts, which may be
moving or rotating, as well as hot surfaces, during operation.
Unjustified removal of protection devices, incorrect use,
faulty installation or inappropriate operation could represent a
serious risk to personnel and equipment.
For further information, consult the documentation.
All work relating to transportation, installation, commissioning
and maintenance must be performed by experienced,
qualified personnel (see IEC 364, CENELEC HD 384 or DIN
VDE 0100, as well as national specifications for installation
and accident prevention).
In these basic safety instructions, qualified personnel means
persons competent to install, mount, commission and operate
the product and possessing the relevant qualifications.
2 - Use
Variable speed drives are components designed for
integration in installations or electrical machines.
When integrated in a machine, commissioning must not take
place until it has been verified that the machine conforms
with directive 2006/42/EC (Machinery Directive). It is
also necessary to comply with standard EN 60204, which
stipulates in particular that electrical actuators (which include
variable speed drives) cannot be considered as circuit-
breaking devices and certainly not as isolating switches.
Commissioning can take place only if the requirements of the
Electromagnetic Compatibility Directive (EMC 2014/30/EC)
are met.
The variable speed drives meet the requirements of the Low
Voltage Directive 2014/35/EU. The harmonised standards of
the DIN VDE 0160 series in connection with standard VDE
0660, part 500 and EN 60146/VDE 0558 are also applicable.
The technical characteristics and instructions concerning the
connection conditions specified on the nameplate and in the
documentation provided must be observed without fail.
3 - Transportation, storage
All instructions concerning transportation, storage and correct
handling must be observed.
The climatic conditions specified in the technical manual must
be observed.
4 - Installation
The installation and cooling of equipment must comply with
the specifications in the documentation supplied with the
product.
The variable speed drives must be protected against any
excessive stress. In particular, there must be no damage
to parts and/or modification of the clearance between
components during transportation and handling. Avoid
touching the electronic components and contact parts.
The variable speed drives contain parts which are sensitive to
electrostatic stresses and may be easily damaged if handled
incorrectly. Electrical components must not be exposed to
mechanical damage or destruction (risks to health!).
5 - Electrical connection
When work is performed on variable speed drives which are
powered up, the national accident prevention regulations
must be respected.
The electrical installation must comply with the relevant
specifications (for example conductor cross-sections,
protection via fused circuit-breaker, connection of protective
conductor). More detailed information is given in the
documentation.
Instructions for an installation which meets the requirements
for electromagnetic compatibility, such as screening, earthing,
presence of filters and correct insertion of cables and
conductors, are given in the documentation supplied with the
variable speed drives. These instructions must be followed
in all cases, even if the variable speed drive carries the CE
mark. Adherence to the limits given in the EMC legislation is
the responsibility of the manufacturer of the installation or the
machine.
6 - Operation
Installations in which variable speed drives are to be
integrated must be fitted with additional protection and
monitoring devices as laid down in the current relevant safety
regulations, such as the law on technical equipment, accident
prevention regulations, etc. Modifications to the variable
speed drives using control software are permitted.
Active parts of the device and the live power connections
must not be touched immediately after the variable speed
drive is powered down, as the capacitors may still be charged.
In view of this, the warnings fixed to the variable speed drives
must be observed.
Permanent magnet motors generate electrical energy while
they are rotating, even when the drive is switched off. In
this case, the drive continues to be powered by the motor
terminals. If the load is capable of turning the motor, a
switching device must be provided upstream of the motor to
isolate the drive during maintenance operations.
During operation, all doors and protective covers must be
kept closed.
7 - Servicing and maintenance
Refer to the manufacturer’s documentation.
See the Maintenance section in this document.
This manual is to be given to the end user.
SAFETY AND OPERATING INSTRUCTIONS FOR VARIABLE SPEED DRIVES