2019.02 / p
Electric Power Generation
18
Installation and maintenance
D510 C
Digital voltage regulator
4243 en -
• Options
To obtain the following options, tick the boxes:
1.
Temperature sensors
, select either 1 PTC
or 3 PT100s.
2.
Current transformers (CTs)
, select the
number (1 or 3), the measurement (IN, IN/2 or
IN/4) and the ratio. unless one CT is mandatory
for parallel operation, PF or kVAR regulation,
stator over current, unbalenced current.
3.
Alternator voltage transformer
, enter the
voltage values at the primary and at the
secondary if a transformer is connected..
4.
Bus voltage transformer
, enter the voltage
values at the primary and at the secondary if a
transformer is connected.
5.
Step-up transformer
, fill the values of
primary and the secondary.
The electrical schematic below shows how the «wiring scheme» part changes according to the
parameters selected.
After entering the data in this page, go to the second page by clicking «Next». In some cases,
you will need to adjust the workscreen in order to access the «Next» button.
1
2
3
4
5
