Nidec D3-0023-B, Руководство пользователя

Страница: 61 / 112

Digistart D3: User Guide
61
Issue: G
Parameter Group Parameters Default Value
3 - Digital Inputs M 3A Input A Function Starter Disable
3B
Input A Name Starter Disable
3C Input A Trip Always Active
3D Input A Initial Delay 00:00 (minutes:seconds)
3E Input A Trip Delay 00:00 (minutes:seconds)
3F Input B Function Input Trip (N/O)
3G Input B Name Input Trip
3H Input B Trip Always Active
3I Input B Initial Delay 00:00 (minutes:seconds)
3J Input B Trip Delay 00:00 (minutes:seconds)
3K
Input C Function
Off
3L Input D Function Off
3M Local/Remote LCL/RMT Anytime
3N Remote Reset Logic Normally Closed
3O
Comms in Remote
Enable Control in RMT
4 - Digital Outputs M 4A Relay A Action Main Contactor
4B
Relay A On Delay 00:00 (minutes:seconds)
4C Relay A Off Delay 00:00 (minutes:seconds)
4D Relay B Action Run
4E Relay B On Delay 00:00 (minutes:seconds)
4F Relay B Off Delay 00:00 (minutes:seconds)
4G Relay C Action Trip
4H Relay C On Delay 00:00 (minutes:seconds)
4I Relay C Off Delay 00:00 (minutes:seconds)
4J Relay D Action Off
4K Relay E Action Off
4L Relay F Action Off
5 - Protection Settings M 5A Excess Start Time 00:20 (minutes:seconds)
5B
Excess Start Time-2 00:20 (minutes:seconds)
5C Current Imbalance 30%
5D Phase Sequence Any Sequence
5E Underpower 20%
5F Overpower 400%
5G
Reserved
-
5H Reserved -
5I Frequency Check Start/Run
5J Frequency Variation ±5 Hz
5K Ground Fault Level 100 mA
5L Motor Temperature Check Do Not Check
6 - Protection Delays M 6A Current Imbalance Delay 00:03 (minutes:seconds)
6B
Underpower Delay 00:05 (minutes:seconds)
6C Overpower Delay 00:00 (minutes:seconds)
6D Reserved -
6E Reserved -
6F Frequency Delay 00:01 (minutes:seconds)
6G Restart Delay 00:10 (minutes:seconds)
6H Ground Fault Delay 00:03 (minutes:seconds)