![background image](http://html1.mh-extra.com/html/nidec/ad1a008fbbnh/ad1a008fbbnh_user-and-maintenance-manual_1687818071.webp)
Summary
Preface
P. 6
Chapter 2
P. 17
Technical data
Chapter 5
P. 76
Reception, storage
and installation
Chapter 4
P. 54
General information
Chapter 3
P. 47
Application notes
Chapter 6
P. 115
Options
Chapter 7
P. 129
Preventive maintenance
Chapter 1
P. 15
Overview
and installation diagram
Answer Drives 1000
71
4
4.7.9 TRIPPING
The disordered deposit of material can typically create a tripping hazard
and partial or total limitation in the escape route in case of need.
• Ensure operational and transit places and escape routes free from
obstacles and in compliance with the requirements in force.
4.7.10 CIRCUIT FAILURES
Because of possible failures, the safety circuits, can lose part of their
effectiveness with related safety level decrease.
• Make periodic checks on the operating status of the AD1000
safety devices.
4.7.11 LIGHTING
The integrator/end user must prepare an adequate lighting system (in
addition to any existing one) of the AD1000 maintenance/operation areas,
complying with the laws in force in the country where the devices are used
and according to the EC Directives avoiding that there are shadow areas
likely to cause nuisance, annoying effects of glare or stroboscopic effects
on the elements due to the lighting.
In case of power failure (or in the case of poor lighting) an average illuminance
of 500 lux is recommended to be carried out by the user/customer.
If additional lighting may be necessary for special and infrequent
maintenance, taking into account the extreme rarity of these operations,
the user must provided portable safety lamps (24 Vdc power, not included
in the supply).
4.7.12 NOISE
All personnel who must access near the AD1000 when it is in operation
should be provided with the appropriate hearing protection.
4.7.13 VIBRATION
The AD1000 in its normal operation does not present conditions of dangerous
vibrations for the operator.
Any conditions of excessive or abnormal vibration may be due to a
malfunction of the rotating devices such as pumps, etc.
In these conditions it is necessary to proceed immediately notifying the
maintenance personnel and stopping the AD1000 to verify/repair it.
4.7.9 TRIPPING - 4.7.10 - 4.7.11 - 4.7.12 - 4.7.13
Содержание AD1A008FBBNH
Страница 138: ......