Nice WIDE L, Инструкции по установке

Страница: 22 / 26

22
Receiver programming and setup.
Erasing a single user from the memory.
Receiver Setup
From Standby status
- “Selected” mode -
- Standby
The barrier can be in any position when performing this routine.
Action
Response
Description Display Buzzer Barrier
To enter the program
menu. Press and hold the

button until buzzer
beeps.
Display and buzzer
confirms.
Programming menu
<or> for options
Scroll < or > to select the
receiver setup option.
Display scrolls
through options.
Receiver Setup
<

= change >
With “Receiver Setup”
on the display, press and
release

.
Display shows current
option status.
Receiver Setup
Quick learn
Scroll < or > to select the
Erase remotes option.
Display scrolls
through options.
Receiver Setup
Erase remotes
With “Erase remotes”
on the display, press and
release

.
Display shows first
erase option.
Erase Remotes
Select Address
With “Select Address”
on the display, press and
release

.
Processor scans the
memory and then
displays the first
available user address
that can be erased.
Erase Address
< 1 >
Scroll < or > to the user
address that you would like
to erase.
Display scrolls
through available
user addresses.
Erase Address
< 5 >
With the correct user
address displayed, press
and release

.
Display confirms the
user address has
been erased.
Erase Remotes
Erase done
After the display confirms
the erasing of the address
is done.
Erase Remotes
Erase done
Display reverts to
main erase remotes
options.
Erase Remotes
Select Address
Repeat the last 4 steps here to erase additional users or exit back one level in the receiver setup menu for other receiver setup options.
x2
x1
Scroll left or right to next
program option.
OR
“Selected” mode
- Standby
EXIT back to standby
status
x2