Nice Apollo 72001K, Руководство по установке

Страница: 4 / 32

4
1 - OVERVIEW
2 - GATE INFORMATION
DO NOT CONNECT
A/C POWER TO THIS
CIRCUIT BOARD!
This circuit board is designed for
10VDC - 35VDC power input only.
CAUTIONS AND NOTES
This instruction manual is intended to aid the installer in the overall process
of correct installation at the desired location. Periodically, the manual will
illustrate “warnings, cautions and notes” which are items the installer should
carefully read to prevent damage to the gate, gate system or personal injury
to yourself or others.
EXTREMELY IMPORTANT
Anyone who installs, assists with installation or otherwise facilitates the
installation in any manner should thoroughly read and understand this manual
in its entirety before any attempt is made to actually begin the installation
process.
ETL DEFINITIONS COMPLIANT TO UL325
• Vehicular Swing-Gate Operator (or system) - A vehicular gate operator (or
system) that controls a gate which swings in a horizontal direction that is
intended for use for vehicular entrance or exit to a drive, parking lot, or the
like.
• Gate - A moving barrier such as a Swinging, sliding, raising, lowering,
rolling, or like barrier that is a stand-alone passage barrier or is that portion
of a wall or fence system that controls entrance and/or egress by persons
or vehicles and completes the perimeter of a defined area.
• Residential Vehicular Gate Operator - Class I - A vehicular gate operator (or
system) intended for use in a home of one to four single family dwellings,
or a garage or parking area associated therewith.
• Commercial / General Access Vehicular Gate Operator - Class II - A
vehicular gate operator (or system) intended for use in a commercial
location or building such as a multi-family housing unit (five or more single
family units), hotel, garages, retail store, or other buildings servicing the
general public.
• Commercial / General Access Vehicular Gate Operator - Class III - A
vehicular gate operator (or system) intended for use in an industrial
location, loading dock area, or other location not intended to service the
general public.
• Commercial / General Access Vehicular Gate Operator - Class IV - A
vehicular gate operator (or system) intended for use in a guarded industrial
location or buildings such as airport security area or other restricted access
locations not servicing the general public, in which unauthorized access is
prevented via supervision by security personnel.
1.1 - 1050 control board
The 1050 main control board is housed in a protective plastic enclosure
that includes a 2-line LCD and with 5 dedicated buttons and 3 buttons for
navigation of the setup, programming, and information menus. Connectors
for power, inputs, and output peripherals are arranged around the edges
of the board and clearly labeled. A plug-in connector is provided for direct
installation of a Nice-brand receiver which can be controlled by up to 1000
transmitters. A reset RJ-11 jack offers a connection to an optional O-view
programmer with Bluetooth and GSM which can be used to control the
gate with a telephone, smartphone, or PC. Connectors for other Nice-brand
plug in accessories include 2-wire Bluebus, self-monitored photocells for
entrapment protection. Dry contact inputs are provided for loop, probe, and
photoelectric detectors, as well as edge sensors, guard station, and fire
department control of gate opening and closing. Voltage outputs (+12VDC
and +24VDC) are also made available to power safety and entrapment-
prevention devices, and a magnetic lock if required. On board charge control
circuitry delivers reliable power to a backup battery (if installed) and the unit
is equipped with input for a solar panel for self-powered installations.
The 1050 main control board accepts DC input voltage ranging from 10VDC
to 35VDC. A 2-line LCD with dedicated buttons allows the installer to quickly
program the 1050 when changes to its factory-default settings need to
be made. A real time clock/calendar enables programming for scheduled
weekly or daily events like opening, closing, or locking the gate. Gate
opening and closing speed, acceleration, soft-start settings, and reversing
speed may be set to factory default settings, or individually programmed per
customized gate installation requirements. Built-in current sensing enables
inherent gate force monitoring and limiting for safety and an on board alarm
indicates when two sequential obstructions have been sensed in either
direction. The “Learn” function helps the gate installer configure the Apollo
1050 control board semi-automatically for optimum settings of gate opening
and closing speeds, with simple programmable adjustments to force and
speed settings that may be made with front panel programming.
1.2 - Main control board specifics
• Inputs for solar panel and batteries.
• Low power consumption in stand-by mode.
• Built-in regulator to keep the battery charged (either through solar or main
power).
• Socket for plug-in Nice receivers.
• Board compatible with Nice Opera System (facilitates programming and
diagnostic’s away from the site of installation).
• Easy programming with LCD display and dedicated buttons.
• Digital programming for auto-close, force, speed, opening delay.
• On board buttons for operating the gate (Open, Close, Stop).
• Built-in voltmeter to check input voltage, battery voltage, solar panel volt
age, motors’ current.
• Temperature sensor to optimize charging battery and system
performance.
• Programmable service alarm.
• 2 Programmable timers (from 1 sec to 9 hours).
• Inputs for guard station, additional third party receivers, loop detectors,
FIRE and UL/Edge signals.
• 2 programmable inputs (open, close, step, mid-position, hold to open,
hold to close, activating timer).
• Surge suppression on every peripheral input (digital and analog).
• Ports for self-powered Nice plug-in peripherals. (BlueBus).
This manual provides documentation that covers the layout, electrical
installation, and programming of the Apollo 1050 gate controller for a typical
installation. Please consult your Apollo distributor for more information
regarding installations or questions not specifically covered in this manual.
2.1 - ASTM F2200
Gates shall be constructed in accordance with the provisions given for the
appropriate gate type listed, refer to ASTM F2200 for additional gate types.
Protrusions shall not be permitted on any gate, refer to ASTM F2200 for
exceptions if any.
Any non-automated gate that is to be automated in any manner should be
upgraded to conform to the provisions contained within the provisions of
this document and ASTM F2200 as applicable.