www.GenieCompany.com/commercial
|
800.843.4084
GCL-J operators are covered by the following U.S. patents: 6737823, 7878931, 8014966, 8113263
The GCL-J is designed for high or full-lift sectional and
rolling doors that have a 30-cycle/hour or less duty
requirement. Advanced features and robust mechanical
design combine to provide a standard-duty operator
that sets a new standard for productivity.
UL325-2010 APPROVED
• Allows for monitored entrapment protection and momentary
operation when used with select photo eyes and/or
edge-sensing devices.
• See back for approved list of monitored devices.
GCL-J Advantages
• MultiVolt
™
- Order phase specific operator for the job and
have the ability to select the right voltage on the job site.
- Single Phase: 115/208/230 VAC
- Three Phase: 208/230/460 VAC
- 575VAC voltage models available separately
• Modular design with optional expansion boards for advanced
timer to close, and auxiliary output functionality.
• LCD display with intuitive setup menu. Provides real-time
status and trouble-shooting assistance.
• Internal receiver with the ability to individually add/delete up
to 50 Intellicode
®
I transmitters directly from the LCD display.
• EZ Limit
™
provides for push to set limits that remain
synchronized with door even during long term loss of power.
• TensiBelt
™
primary drive reduction eliminates need to adjust
belt tension.
• Open/close/stop and setup keys included on control
board. Keeps all controls near the LCD display convenient
for set up.
Standard Features
• EZ Limit
™
electro-mechanical limits.
• MultiVolt
™
voltage simplification.
• Max run timer automatically adjusts to up and down run time.
• TensiBelt
™
primary reduction.
• Delay on reverse.
• 16-character LCD display.
• UL325-2010 approved.
• Advanced radio receiver displays and stores activation by transmitter
ID number on the LCD screen.
• 3-button control station.
• 2-year/20,000-cycle warranty.
• Programmable mid-stop.
• Pull cord release for emergency manual operation.
GENIE
®
CommErCIAL opErATors
GCL-J
STANDARD-DUTY JACKSHAFT OPERATOR