Nibe Contura 655, Руководство по установке

Страница: 10 / 20

56
GB
Hold the side panel approximately 20 mm above
the base panel and turn the side panel’s front edge
around the edge of the leg. Align and depress the
side panel end over the base panel’s shaft pin. Use crosshead screws with washers to secure the
side panels. Adjust the side panels so that they lie
against the insert at the front edge and against the
back panel at the rear edge.
Install the steel shelf, soapstone shelf or oven according to the instructions in the section for the respective
accessory on pages 60 and 61. This must be done before the steel or soapstone top is installed.
655
LEK
LEK
LEK
LEK
Rating plates
Rating plates
The rating plate with the production number is on the leg at the front edge, on the left. The rating plate with
installation distances is on the reverse, either on the inside or outside.