Nexxt Solutions NPC-T27U66B, Инструкция по эксплуатации

Страница: 8 / 11

Rear door assembly
1. Identify the split rear door, bushings and pivot pins.
2. Insert the first bushing into the pivot pin at the bottom of the door
and hold it in place.
3. While supporting the door, align the bottom pivot pin with the
hinge hole on the frame, until it latches into position.
4. Next, pull down the pivot pin on the upper side of the door, align it
with the top hinge hole on the frame, and finally release it to secure
it into the enclosure.
5. Repeat the same steps to mount the other side of the door.
6. Verify that the doors are properly levelled and that both sides
open and close without friction or resistance.
7. Confirm that the door locks properly by closing the left door first,
followed by the right side door.
8. Lock the doors in position by inserting the key and turn it
clockwise to verify that the locking mechanism is working properly.
Split mesh rear door with lock (1)
Hinge bushings (2)
FRONT
REAR
7
3
25
16
Rear door key set (1)
Front door assembly
1. Identify the front door, bushing and pivot pins.
2. Insert the bushing into the pivot pin at the bottom of the door and
hold it in place.
3. While supporting the door, align the bottom pivot pin with the
hinge hole on the frame, until it latches into position.
4. Pull down the pivot pin on the upper side, align it with the top
hinge hole on the frame, and release to secure it into the enclosure.
5. Verify that the door is properly levelled and that it opens and
closes without friction or resistance.
6. Confirm that the door locks properly by pushing the handle inward,
insert the key in the lock and turn it clockwise.
7. Push the button to verify that the locking mechanism is engaged.
8. To open the door, turn the key counterclockwise and push the
button to release the handle from its locking position.
Hinge bushing (1)
Front door (1)
1
8
25
FRONT
REAR
Front panel key set (1)
15
Pivot pin
Pivot pin
13 14