NexWatch PW-5000 PW5K1EN, Руководство по установке

Страница: 6 / 14

PW5K1EN Ethernet Daughter Installation Guide
6 TD1120 rev1101
WARNING
Use suppressors on all door strikes. Use S-4 suppressors for
installation. NexWatch recommends only DC strikes.
CAUTION
IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST
BE FILED WITH THE COMMERCIAL CARRIER RESPONSIBLE.
CAUTION
Electro-static discharge can damage CMOS integrated circuits and
modules.
To prevent damage always follow these procedures:
Use static shield packaging and containers to transport all elec-
tronic components, including completed reader assemblies.
Handle all ESD sensitive components at an approved static
controlled workstation. These workstations consist of a desk mat,
floor mat and an ESD wrist strap. Workstations are available from
various vendors.
NOTICE
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
NOTICE
This document and the data in it shall not be duplicated, used or
disclosed to others for procurement or manufacture, except as
authorized by and with the written permission of, NexWatch, Inc.
The information contained in this document or in the product itself
is considered the exclusive property and trade secrets of
NexWatch, Inc. Copyright laws of the United States protect all
information in this document or in the software product itself.