Nexus NX2500, Инструкция по установке и эксплуатации

Страница: 42 / 52

VHF NX2500 English
41
16 Installation
16.1
Unit Installation
The NX2500 should be sited so that engine noise and vibration or other background
noise does not make it difficult for the operator to hear.
It is recommended that it is not installed where it will be exposed to continuous direct
sunlight as this will eventually damage the LCD display.
As loudspeakers contain powerful magnets, the radio should not be installed within 1m
(3ft 3in) of any compasses, whether magnetic or electronic.
The fins on the back of the case act as a heat sink to dissipate heat generated by the
set when in use, which maintains the high efficiency of the radio. The free circulation of
air is essential - if mounting the radio is in an enclosed space ensure that the space is
vented.
The NX2500 is supplied with a reversible mounting bracket. This can be used to mount
the radio on the chart table or on an overhead bulkhead (Fig A). Before installing,
ensure that there is at least 101mm (4.0 in) verticals clearance and 70mm (2 3/4in)
horizontal clearance behind the bracket to allow the radio to fit (Fig B). The rake angle
of the radio can be adjusted by slackening the clamp.
Fig C
Fig B
Fig A