Nexus NX2500, Инструкция по установке и эксплуатации

Страница: 25 / 52

English VHF NX2500
24
Press (CLR) key to exit the call log screen.
9 DSC Setting
9.1
Enter and view MMSI
If a MMSI No. has not been entered into the NX2500, the MMSI SET screen will appear
on the display every time when the unit is switched on, as below:
If you do not have a MMSI-number, you can still use the unit, but the DSC function can
not be used, and every time when the NX2500 is switched on, it will be asked to enter
the MMSI number.
Switch on the unit, then press numeric key on the fist microphone/controller to enter the
MMSI number (9-digit). This number can be obtained from your local Radio
communications authority. If a mistake is made, use the
◄ or ► key to move back and
edit the error. Then press (ENT) key, the Radio will ask for verification as below:
It is important that the MMSI entered is checked carefully, as it can only be entered
once!